|
產品介紹 > 漏水自動斷水裝置 |
|
漏水自動斷水裝置Automatic water leakage preventive device |
● Easy installation. ● No limitation for device installed to where may leaks occur. ● No AC power needed. ● Anti-corrosion. ● Solenoid valve can withstand > 110 psi water pressure. ● Newly designed sensor with higher sensitivity can detect pure water. ● Less than 1 second reaction time lagging from water detected to stop water flow. ● Can hold water stoppage until problem solved.
|
|
|
|
Specifications : 1. Solenoid valve operation (3V
DC). 2. Battery operated ( 2*1.5 V AA batteries can last 3 years) 3.
Solenoid valve guaranteed more than one thousand times on/off action. 4.
Water sensitivity < 2 ppm TDS. 5. Reaction time < 1 second. 6. Alarm
when battery is low. 7. Ambient temp. 5~60℃. 8. Weight: 300g. 9.
Package size: 11cm (W) x 11cm (L) x 5cm (H).
Note: please use alkaline
battery.
Installation and operation
procedure : ● Open the cover of the control box. ● Insert 2 of
1.5V AA batteries inside and cover it. ● Connect inlet side of the solenoid
valve to the water faucet. ● Connect the outlet side of the solenoid valve to
the pure water system. ● Press the test button on the control box to check
valve's function( green light on , valve closed and stop the water flow). ●
Press the test button again to check valve's function( green light off , valve
opened ). ● Secure the control box on the wall or on the floor. ● Place
two or more water leakage sensors to where water might flooded. ● Check the
water source opened. ● When battery is low, alarm light will blinking and
remind to replace batteries. | |
|
|